Product Search

    SEARCH NOW FOR ALL YOUR IRONHORSE SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Radwell is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 301-350 of 995.
    AUTOMATION DIRECT MTCP2-030-3BD18

    AUTOMATION DIRECT

    IRONHORSE

    MTCP2-030-3BD18

    IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 30HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 286T FR ...
    CAN$5,834.90 Buy Surplus As Low As CAN$3,606.84
    CAN$3,606.84
    Repair Yours CAN$2,533.52
    AUTOMATION DIRECT WG-325-030-RC

    AUTOMATION DIRECT

    IRONHORSE

    WG-325-030-RC

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 30:1 RATIO, NEMA 182TC INPUT, RIGHT HAND, 1.375IN DIAMETER OUTPUT SHAFT, NOMINAL 3.66HP AT 1.0 SF, 3045 LB-IN MECHANICAL OUTPUT TORQUE, 3-1/4IN CENTER DIST ...
    CAN$1,323.74 Buy Surplus As Low As CAN$818.94
    CAN$818.94
    Repair Yours CAN$576.25
    AUTOMATION DIRECT WG-325-030-HA

    AUTOMATION DIRECT

    IRONHORSE

    WG-325-030-HA

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 30:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.937IN DIAMETER OUTPUT SHAFT, NOMINAL 3.66HP AT 1.0 SF, 3045 LB-IN MECHANICAL OUTPUT TORQUE, 3-1/4IN CENTER DISTANCE, ...
    CAN$1,731.16 Buy Surplus As Low As CAN$1,070.15
    CAN$1,070.15
    Repair Yours CAN$751.95
    SEW EURODRIVE R37D16DRN71M4

    SEW EURODRIVE

    R37D16DRN71M4

    GEAR MOTOR, 1730/36 RPM, RATIO 48.08, 0.5 HP, 60 HZ, 266/460V, HELICAL
    CAN$4,559.09 Buy Surplus As Low As CAN$2,818.39
    CAN$2,818.39
    Repair Yours CAN$1,950.29
    CHROMALOX 052560002

    CHROMALOX

    052560002

    CONTACTOR, 3 POLE, 30 AMP, 110 VAC, 50/60 HZ
    CAN$1,926.84 Buy Surplus As Low As CAN$868.31
    CAN$868.31
    Repair Yours CAN$601.30
    HEXAGON MANUFACTURING INTELLIGENCE H007622

    HEXAGON MANUFACTURING INTELLIGENCE

    H007622

    CMM DRYER, MAX. INLET FLOW 566 L/M , MAX. OUTLET FLOW 473 L/M [16.7 CFM] ,
    CAN$5,909.76 Buy Surplus As Low As CAN$3,545.86
    CAN$3,545.86
    ELTEX KNH64/L2A

    ELTEX

    KNH64/L2A

    DISCONTINUED BY MANUFACTURER, GENERATOR, HIGH VOLTAGE, I OUT: 2.5 MA, 230 VAC, 50/60 HZ, U OUT: 0-60 KV DC NEG
    Buy Surplus As Low As CAN$5,635.63
    CAN$5,635.63
    Repair Yours CAN$2,958.71
    FLUKE 9142-A-256

    FLUKE

    9142-A-256

    FIELD METROLOGY DRY-WELL, 115-230 VAC, 50-60 HZ, 575 W, TEMERATURE RANGE: -25 TO 150 DEGREES CELCIUS, LCD DISPLAY, 13-BUTTON KEYPAD, RS-232 INTERFACE, W/ 9142-INSA (INSERT "A" IMPERIAL MISC ...
    CAN$18,785.43 Buy Surplus As Low As CAN$11,271.26
    CAN$11,271.26
    Repair Yours CAN$7,504.78
    BECKER PUMPS G010240

    BECKER PUMPS

    G010240

    VACUUM PUMP, VT 4.4, OPEN FLOW, 25.1 HG MAX, OIL LESS ROTARY VANE, 3-PHASE, 202-300/350-520V @ 60 HZ, 175-260/300-450V @ 50 HZ
    CAN$2,254.09 Buy Surplus As Low As CAN$1,353.63
    CAN$1,353.63
    Repair Yours CAN$947.25
    INVENSYS IGP10S-T52E1FP-L1

    INVENSYS

    FOXBORO

    IGP10S-T52E1FP-L1

    IGP10S, ADVANCED GAUGE PRESSURE TRANSMITTER, REMOTE COMMUNICATION CAPABILITIES, SIL 2 AS STANDARD (HART)
    CAN$3,402.11 Buy Surplus As Low As CAN$2,041.55
    CAN$2,041.55
    Repair Yours CAN$1,426.76
    ASEA BROWN BOVERI BSM63N-275BF

    ASEA BROWN BOVERI

    BALDOR RELIANCE

    BSM63N-275BF

    DISCONTINUED BY MANUFACTURER, AC SERVO MOTOR, BRUSHLESS, BSM SERIES, 1.94 AMP CONTINUOUS, 6.96 AMP PEAK, 300 VAC, 1.47 NM, 0.53 KW, 4000 RPM, MOTOR AND BRAKE, CONDUIT BOX, INCREMENTAL ENCODE ...
    Buy Surplus As Low As CAN$2,254.25
    CAN$2,254.25
    Repair Yours CAN$1,871.03
    HONEYWELL TVMUGR-888000-000-22-4-010-0U0300-014

    HONEYWELL

    TVMUGR-888000-000-22-4-010-0U0300-014

    DISCONTINUED BY MANUFACTURER, CHART RECORDER, MULTITREND, 12.1 INCH TFT TOUCH SCREEN WITH XGA RESOLUTION, UP TO 48 ANALOG INPUTS, 2GB INTERNAL MEMORY, 90-240 VAC, 50/60 HZ
    Buy Surplus As Low As CAN$12,197.05
    CAN$12,197.05
    Repair Yours CAN$6,037.20
    TEMA VT830TS-ILAPAK

    TEMA

    VT830TS-ILAPAK

    DISCONTINUED BY MANUFACTURER, INDUSTRIAL PC, HMI DISPLAY, 24VDC - 3A MAX, 2 USB PORTS
    Buy Surplus As Low As CAN$5,227.31
    CAN$5,227.31
    Repair Yours CAN$2,407.62
    EATON CORPORATION KDG4V333C30XMUHA760

    EATON CORPORATION

    VICKERS

    KDG4V333C30XMUHA760

    PROPORTIONAL DIRECTIONAL VALVE, 60 SERIES, 30 LPM A PORT FLOW, 7.90 USGPM A PORT FLOW, SOLENOID CONTROLLED, 30 LPM B PORT FLOW, 7.90 USGPM B PORT FLOW, 24 VDC, 5000 PSI MAAX, SINGLE STAGE, 0 ...
    CAN$3,339.67 Buy Surplus As Low As CAN$2,003.80
    CAN$2,003.80
    Repair Yours CAN$1,149.37
    GENERAL ELECTRIC UR9NV

    GENERAL ELECTRIC

    MULTILIN

    UR9NV

    DISCONTINUED BY MANUFACTURER, CPU, PROCESSOR TYPE: 32-BIT MICROPROCESSOR, CLOCK SPEED: 1 GHZ, MEMORY:, RAM: 512 MB, FLASH: 1 GB, INPUT VOLTAGE RANGE: 24V DC, DIN RAIL MOUNTABLE
    Buy Surplus As Low As CAN$1,698.87
    CAN$1,698.87
    Repair Yours CAN$943.69
    SEW EURODRIVE KH37/T CMP50M/BK/PK/RH1M/SB1

    SEW EURODRIVE

    KH37/T CMP50M/BK/PK/RH1M/SB1

    DISCONTINUED BY MANUFACTURER, 400VAC, 9.60A, IP65, 16.844KG, 4500RPM
    Buy Surplus As Low As CAN$3,939.00
    CAN$3,939.00
    Repair Yours CAN$3,270.00
    EMERSON 3144PD1A2NAU1B4

    EMERSON

    3144PD1A2NAU1B4

    TEMPERATURE TRANSMITTER, ROSEMOUNT 3144P, ALUMINUM ½-14 NPT, 32 TO 212 DEG
    CAN$4,560.82 Buy Surplus As Low As CAN$2,737.08
    CAN$2,737.08
    Repair Yours CAN$1,901.27
    BELL MARK EY3500

    BELL MARK

    EY3500

    DISCONTINUED BY MANUFACTURER, PRINTER CONTROLLER, EASYPRINT S32, 1 X USB, INDUSTRIAL THERMAL PRINTER, HIGH-RESOLUTION LABEL PRINTING, FAST PRINT SPEED, PROGRAMMABLE CONTROL INTERFACE DURABLE
    Buy Surplus As Low As CAN$4,508.50
    CAN$4,508.50
    Repair Yours CAN$3,649.07
    BOSCH BTC06.2A-F-EH3-FW

    BOSCH

    REXROTH

    BTC06.2A-F-EH3-FW

    DISCONTINUED BY MANUFACTURER, HANDHELD UNIT, W/ E-STOP BUTTON AND LIVEMAN SWITCH, W/ 40 KEYS INSERT, HANDWHEEL, (R911285854)
    Buy Surplus As Low As CAN$6,762.75
    CAN$6,762.75
    Repair Yours CAN$5,034.50
    GHISALBA GH64-3-22

    GHISALBA

    GH64-3-22

    CONTACTOR, 3 POLE, 860A, AC3, 500KW, 1100A AC-1, 690V, 2NO+2NC AUX, COIL VOLTAGE 220-240V/50-60HZ / 200-220VDC
    CAN$39,893.06 Buy Surplus As Low As CAN$23,936.71
    CAN$23,936.71
    Repair Yours CAN$16,357.45
    HONEYWELL 060-H032-02-01

    HONEYWELL

    SENSOTEC

    060-H032-02-01

    LONG STROKE DISPLACEMENT TRANSDUCER, DC/DC, MODEL JEC-AG, AY322HQ 6X, +/- 1 INCH, +/- 15 VDC
    Buy Surplus As Low As CAN$2,003.80
    CAN$2,003.80
    ALLEN BRADLEY 20GE6ND156LNANNNNN

    ALLEN BRADLEY

    20GE6ND156LNANNNNN

    AC DRIVE, POWERFLEX 755T, (ND): 125 HP (156 A), (LD): 150 HP (186 A), (HD): 100 HP (125 A), 480 VAC, 3 PHASE
    Buy Surplus As Low As CAN$37,752.77
    CAN$37,752.77
    Repair Yours CAN$18,645.06
    GORMAN RUPP 1627-310-00

    GORMAN RUPP

    AMT PUMPS

    1627-310-00

    COMMERCIAL DUTY PUMP MOTOR, MODEL: P63FKM-1646, 3 PHASE TEFC, 60 HZ DATA: 1 1/2 HP/3450 RPM/208-230/460 VOLTS/4.3-4.2/2.2 F.L.A/1.3 S.F./5.6-5.4/2.7 S.F.A, 50 HZ DATA: 1 1/2 HP/2850 RPM/190/ ...
    CAN$1,306.83 Buy Surplus As Low As CAN$784.10
    CAN$784.10
    Repair Yours CAN$548.94
    BARKSDALE D1T-H18SS-FX

    BARKSDALE

    D1T-H18SS-FX

    TERMINAL BLOCK DIAPHRAGM SWITCH, D1T SERIES, 10 AMP AT 125/250 VAC LIMIT SWITCH, 0.4 - 17.74 PSI DECREASING, 0.66-18 PSI INCREASING, 60 PSI PROOF PRESSURE, NEMA 4X ENCLOSURE, 1/4 INCH NPT FE ...
    CAN$1,974.76 Buy Surplus As Low As CAN$1,184.86
    CAN$1,184.86
    Repair Yours CAN$820.29
    KEB AUTOMATION 06.10.670-122U

    KEB AUTOMATION

    06.10.670-122U

    CLUTCH BRAKE, ELECTRIC, 5/8" X 5/8" SHAFT, 5 FT-LB, 56C FLANGE, 12 VDC
    CAN$2,239.03 Buy Surplus As Low As CAN$1,344.58
    CAN$1,344.58
    Repair Yours CAN$930.38
    HYDAC 3763391

    HYDAC

    3763391

    HSP32-C 26L/71-B5 X VITON
    CAN$3,474.00 Buy Surplus As Low As CAN$2,085.00
    CAN$2,085.00
    ASCO P2AT-12A2E-AAA0

    ASCO

    ASCO NUMATICS

    P2AT-12A2E-AAA0

    PNEUMATIC CYLINDER, A SERIES, DETACHABLE CLEVIS, 5" BORE, 12" STROKE, STANDARD ROD, 1/2" NPTF PORT, POSITION #1, NO CUSHIONS, NO MAGNET
    CAN$1,154.57 Buy Surplus As Low As CAN$714.40
    CAN$714.40
    Repair Yours CAN$494.83
    UNISON L63585P01

    UNISON

    L63585P01

    IGNITION EXCITER, 90 SEC. ON/OFF, 90 SEC ON. / 25 MIN. OFF, 115 VAC, 50/60 HZ, 1.3 A
    CAN$64,560.13 Buy Surplus As Low As CAN$38,737.24
    CAN$38,737.24
    Repair Yours CAN$26,571.29
    AUTOMATION DIRECT WG-262-010-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-010-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 182TC INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 4.17HP AT 1.0 SF, 1445 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
    CAN$838.79 Buy Surplus As Low As CAN$518.37
    CAN$518.37
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-262-005-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-005-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 182TC INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 5.24HP AT 1.0 SF, 924 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, CA ...
    CAN$838.79 Buy Surplus As Low As CAN$518.37
    CAN$518.37
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-060-R

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-060-R

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 0.86HP AT 1.0 SF, 1149 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTAN ...
    CAN$830.34 Buy Surplus As Low As CAN$514.02
    CAN$514.02
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-060-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-060-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 0.86HP AT 1.0 SF, 1149 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, CA ...
    CAN$786.63 Buy Surplus As Low As CAN$486.43
    CAN$486.43
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-040-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-040-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.45HP AT 1.0 SF, 1483 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, CA ...
    CAN$786.63 Buy Surplus As Low As CAN$486.43
    CAN$486.43
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-040-R

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-040-R

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.45HP AT 1.0 SF, 1483 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTAN ...
    CAN$830.34 Buy Surplus As Low As CAN$514.02
    CAN$514.02
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-020-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-020-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.06HP AT 1.0 SF, 1195 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, CA ...
    CAN$786.63 Buy Surplus As Low As CAN$486.43
    CAN$486.43
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-020-R

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-020-R

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.06HP AT 1.0 SF, 1195 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTAN ...
    CAN$830.34 Buy Surplus As Low As CAN$514.02
    CAN$514.02
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-206-015-R

    AUTOMATION DIRECT

    IRONHORSE

    WG-206-015-R

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2.09HP AT 1.0 SF, 1002 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, ...
    CAN$689.36 Buy Surplus As Low As CAN$426.90
    CAN$426.90
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-206-BASE

    AUTOMATION DIRECT

    IRONHORSE

    WG-206-BASE

    IRONHORSE MOUNTING BASE, FOR USE WITH WG-206 SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
    CAN$69.08 Buy Surplus As Low As CAN$43.56
    CAN$43.56
    AUTOMATION DIRECT WG-237-060-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-060-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 0.86HP AT 1.0 SF, 1149 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, C ...
    CAN$982.59 Buy Surplus As Low As CAN$608.40
    CAN$608.40
    Repair Yours CAN$427.58
    AUTOMATION DIRECT WG-237-040-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-040-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 1.45HP AT 1.0 SF, 1483 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, C ...
    CAN$982.59 Buy Surplus As Low As CAN$608.40
    CAN$608.40
    Repair Yours CAN$427.58
    AUTOMATION DIRECT WG-237-015-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-015-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 2.64HP AT 1.0 SF, 1249 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, C ...
    CAN$982.59 Buy Surplus As Low As CAN$608.40
    CAN$608.40
    Repair Yours CAN$427.58
    AUTOMATION DIRECT WG-237-015-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-015-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.64HP AT 1.0 SF, 1249 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, CA ...
    CAN$786.63 Buy Surplus As Low As CAN$486.43
    CAN$486.43
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-015-R

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-015-R

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.64HP AT 1.0 SF, 1249 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTAN ...
    CAN$830.34 Buy Surplus As Low As CAN$514.02
    CAN$514.02
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-020-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-020-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 2.06HP AT 1.0 SF, 1195 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, C ...
    CAN$982.59 Buy Surplus As Low As CAN$608.40
    CAN$608.40
    Repair Yours CAN$427.58
    AUTOMATION DIRECT WG-237-010-R

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-010-R

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.47HP AT 1.0 SF, 1158 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTAN ...
    CAN$830.34 Buy Surplus As Low As CAN$514.02
    CAN$514.02
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-005-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-005-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 4.57HP AT 1.0 SF, 798 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, CAST ...
    CAN$786.63 Buy Surplus As Low As CAN$486.43
    CAN$486.43
    Repair Yours CAN$362.15
    AUTOMATION DIRECT WG-237-010-D

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-010-D

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.47HP AT 1.0 SF, 1158 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, CA ...
    CAN$786.63 Buy Surplus As Low As CAN$486.43
    CAN$486.43
    Repair Yours CAN$369.98
    AUTOMATION DIRECT WG-237-010-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-010-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 3.47HP AT 1.0 SF, 1158 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, C ...
    CAN$982.59 Buy Surplus As Low As CAN$608.40
    CAN$608.40
    Repair Yours CAN$427.58
    AUTOMATION DIRECT WG-206-060-R

    AUTOMATION DIRECT

    IRONHORSE

    WG-206-060-R

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.6HP AT 1.0 SF, 750 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, C ...
    CAN$696.26 Buy Surplus As Low As CAN$431.17
    CAN$431.17
    Repair Yours CAN$369.66
    AUTOMATION DIRECT WG-206-060-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-206-060-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 0.6HP AT 1.0 SF, 750 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, C ...
    CAN$861.35 Buy Surplus As Low As CAN$532.89
    CAN$532.89
    Repair Yours CAN$374.75
    Previous Next
    2 3 4 5 6 7 8 9 10 11 12